Retrosound DAB+ Retro Radio TRIM Design Oldtimer Radio
Model variant: More details on the model variants can be found in the respective tab. When you have decided on a model variant, please select the desired model variant in the selection field.
You can order the retro radio in a choice of two different models: "Motor-1DAB-1" the entry-level model with UKW / FM radio receiver, RDS, AUX-IN jack plug, DAB+ digital radio, Bluetooth for streaming music and hands-free calling and a warm white LCD color display. The flagship "Motor-6DAB", which is the top class of Retrosound retro radios, offers additionally certified Apple iPod / iPhone control, 2 USB inputs and an LCD display with 32,000 different colors, so you can adapt the lighting color perfectly to your classic car! Motor-1DAB-1 and Motor-6DAB are nearly compatible with all Smartphone (Android, Apple and more) models to stream music and make phone calls over Bluetooth.
H mark:
Any concerns that your H license plate might be in danger through the installation of a RetroSound car radio are unfounded. After purchasing the RetroSound retro radio, you will receive the download by email where you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ). This means that the RetroSound car radio, including the vehicle-specific panel and control buttons, may be installed in oldtimers with an H license plate or do not prevent the H license plate from being issued!
General data:
Dimensions of the basic radio unit: 101x51x136mm
Power supply: 10.5 Volt to 14.4 volts
Maximum power consumption: 15 amps
Quiescent current: 3.5 mA
Output power: 12V, 4 ohms, <1% distortion: 4x18 watts RMS
Speaker impedance: 4-8 ohms
You can find more information in the respective tab.
Optional Bluetooth remote control:
Compatible with almost all Apple iPhone and Android Smartphones. This Bluetooth remote control can volume adjust, title switch and Play/Pause. Also you can with this Bluetooth remote control accept phone calls or finish them (Button: Play/Pause). You can find more information here.
Optional DAB+ antenna splitter:
If you don't have a DAB antenna and only have a passive telescopic or rod antenna, you will need this DAB+ antenna splitter to receive DAB Digital Radio, which you must purchase separately. You can find more information here.
RetroSound Radio E approval:
E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00
The RetroSound retro car radio is supplied as a kit - no problem even for laypeople
Condition: New
Model variant: Motor-1DAB-1
The RetroSound Motor-1DAB-1 retro radio is the basic model with DAB+ digital radio, FM/MW with RDS, Bluetooth hands-free system, A2DP audio streaming and an AUX-IN 3.5 jack MP3 connector (on the back of the device). With the Retrosound's patented "InfiniMount" mounting system and controls, you get the design of your classic and don't have to do without modern digital media. Bluetooth for Music streaming and Hands-free is compatible with all Smartphone Brands and operating system's.
Supports automatic antenna (motor antenna)
Supports RetroSound radio amplifiers
RetroSound Motor-1DAB1 connections:
Number of AUX inputs (stereo): 1 AUX input
Features:
- Support automatic antenna (motor antenna)
- Supports amplifiers
- DAB+/FM/AM radio receiver with RDS and 30 preset stations
- Tuner with European odd and even radio frequencies
- Selectable USA/EUR/AUS/JAP/RUS tuner frequencies
- A2DP Bluetooth audio playback for wireless smartphone integration
- Bluetooth hands-free kit including a microphone
- Integrated 4-channel amplifier (4 x 18 watts RMS / 40 watts peak x 4 channels)
- 3 equalizer programs plus individual bass/treble/fader/balance adjustment
- XBAS loudness function
- Non-volatile memory
- Warm white LCD lighting
- AUX input (3.5mm) on the back of the device
- Dimensions radio base unit: 101mm x 51mm x 136mm
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00
Successor model of Retrosound Radio:
RC-900C, RC-900B, Classic, Laguna, Motor-1A, Motor-1, Motor-L, Motor-1DAB, Motor-2DAB, Hermosa, Motor-2, Motor-H, Zuma, Santa Barbara, Motor-7
Scope of delivery of the vintage radio Motor-1DAB-1:
- RetroSound Radio module Motor-1DAB-1
- RetroSound Display unit Chrome
- Illumination Color (LCD): warm white
- Microphone for handsfree
- RetroSound front panel (black/chrome)
- RetroSound front control button plastic (black)
- RetroSound rear control ring plastic (chrome)
- Screw and fastening material
- ISO connection cable (power & speaker harness)
- Fastening material - Universal 1-DIN installation kit
Model variant: Motor-6DAB
The Retrosound Motor-6DAB retro radio has DAB+, RDS, Bluetooth hands-free system, A2DP audio streaming and much more. With certified Apple iPod / iPad / iPhone control, the touchscreen operation of the Apple iPod / iPhone is still active in parallel. Supports all smartphone brands for transferring music or making calls! The LCD display of the RetroSound Motor-6DAB has 32,000 different colors, so you can adapt the lighting color perfectly to your classic car! The new push button operation is a real breakthrough in sound systems for classic vehicles. Of course, the retro radio RetroSound Motor-6DAB also has the flexible "InfiniMount" mounting system and control controller patented by RetroSound. With this RetroSound Motor-6DAB you get the design of your classic and don't have to do without modern digital media. Two USB inputs and two AUX inputs on the back of the device allow you to play external MP3 players such as an iPod etc.
Supports automatic antenna (motor antenna)
Separate switch-on lead for motor antenna and amplifier
Integrated Bluetooth with A2DP audio streaming and external microphone for hands-free calling. Supports all smartphone brands for transferring music or making calls!
RetroSound Motor-6DAB connections:
2 USB inputs (rear of device) up to max.32GB
2 AUX inputs (stereo)
3 RCA outputs (stereo) for external amplifiers (front / rear / subwoofer)
FM / MW radio tuner:
VHF / FM European radio frequency range with RDS 87.5 mHz to 107.9 mHz (in 0.05 MHz. Steps)
Tuner with European even and odd radio frequencies
AM / MW frequency range 530 kHz to 1710 kHz (in 9 kHz steps)
Antenna external connection
IPOD / IPHONE / IPAD compatibility
You can of course operate an Apple iPhone wirelessly via Bluetooth with this car radio. If you want to control the iPhone wired, you also need a corresponding USB adapter cable (not included in delivery).
LEGAL NOTICE (APPLE)
iPod / iPad / iPhone are trademarks of APPLE Computer, registered in the US and other countries. For best results, Apple has created specific compatibility requirements for accessory manufacturers. Products that are designed and certified as compatible have the "Made for" label on the packaging. To ensure compatibility when purchasing third-party accessories for use with your device, look for accessories labeled "Made for" for your device (see below). "Made for iPod" means that an additional electronic device has been designed to connect specifically to the iPod and has been certified by the developer to meet Apple performance standards. “Made for iPhone” means that an additional electronic device has been specially designed to connect to the iPhone and has been certified by the developer to meet Apple performance standards.
Successor to the Retrosound radio:
Long Beach, Motor-3, Model Two, Model 2, San Diego DAB+, Motor-6
Scope of delivery of the vintage radio:
- RetroSound Motor-6DAB radio module
- RetroSound display unit with 32,000 display colors (chrome)
- Hands-free microphone
- RetroSound front panel (black/chrome)
- RetroSound front control button plastic (black)
- RetroSound rear control ring plastic (chrome)
- Screw and fastening material
- ISO connection cable (power & speaker harness)
- Fastening material - Universal 1-DIN installation kit
