Retrosound Europa Design Motor-1DAB Complete Set Vintage DAB+ Retro Radio
The Retrosound Motor-1DAB retro radio in Europa Design has DAB+ digital radio, FM/MW with RDS and AUX-IN 3.5 jack plug connection. The LCD-Display of the Motor-1DAB have the color warm white! With this RetroSound, you get the design of your classic and you don't have to miss modern digital media functions. An AUX input on the back of the device allows you to connect an external MP3 player, Smartphone or other external devices with a headphone output to play it back through the vehicle speakers.
With DAB+ antenna splitter:
If you want to install the Retrosound Europa Design Motor-1DAB retro car radio with DAB+ in your car and your vehicle still have a telescopic or rod antenna without an integrated amplifier, then use the DAB+ antenna splitter provided. This allows you to use this antenna for FM and DAB+ and avoid the installation of additional DAB+ antennas.
H-Mark:
Any concerns that your H license plate might be in danger through the installation of a RetroSound Europa radio are unfounded. After purchasing the RetroSound Motor-1DAB radio you will receive the download by email where you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ). This means that the RetroSound car radio, including the vehicle-specific panel and control buttons, may be installed in classic cars with an H license plate or not prevent the assignment of the H license plate!
Features:
- Supports automatic antenna (motor antenna)
- Playback of MP3 and WMA files via the rear AUX input
- LCD lighting with the color warm white
- Number of AUX inputs (stereo): 1 input (rear of device)
- DAB+ / FM / MW radio receiver with RDS and 30 station presets
- Tuner with European even and odd radio frequencies
- Selectable USA/EUR/AUS/JAP/RUS tuner frequencies
- Integrated 4-channel amplifier (4x 18 watts RMS / 40 watts peak x 4 channels)
- 3 equalizer programs plus individual bass / treble / fader / balance setting
- XBAS loudness function
- Non-volatile memory
- E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00
Optional Bluetooth adapter:
Occupies the existing AUX input on the Retrosound radio in order to be able to transmit (stream) your music, audiobooks or navigation wirelessly via Bluetooth with this Bluetooth receiver and thus be able to enjoy them in the vehicle via the loudspeakers. Connection is easy to set up and your device will be automatically detected and connected next time. All settings such as volume, music selection and play / pause are made on your external device. The Bluetooth receiver can be installed out of sight because it has no controls or buttons that need to be operated. It can only be used in vehicles and not in continuous operation.
Condition: New
The RetroSound Europa Design Motor-1DAB Complete Set is supplied as a kit - no problem even for laypeople
Retrosound Europa Design Motor-1DAB Complete Set Vintage DAB+ Retro Radio
Supports automatic antenna (motor antenna)
Separate switch-on lead for motor antenna and amplifier
RetroSound Motor-1DAB connections:
1 AUX input (stereo, rear of device)
FM / MW radio tuner:
UKW / FM European radio frequency range with RDS 87.5 mHz to 107.9 mHz (in 0.05 MHz. Steps)
Tuner with European even and odd radio frequencies
AM / MW frequency range 530 kHz to 1710 kHz (in 9 kHz. Steps)
Antenna external connection
DAB+ reception via SMB antenna input for passive DAB+ antennas
Dimensions of the basic radio unit: 101x51x136mm
Power supply: 10.5 volts to 14.4 volts
Maximum power consumption: 15 amps
Quiescent current: 3.5 mA
Output power: 12V, 4 ohms, <1% distortion: 4x15 watts sinus
Speaker impedance: 4-8 ohms
Input sensitivity: AUX1> 300 mV / 6 kOhm
E approval:
e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00
Successor to the Retrosound radio:
RC-900C, RC-900B, Classic, Laguna, Motor-1A, Motor-1, Motor-L
Retrosound Europa Design Motor-1DAB Complete Set Vintage DAB+ Retro Radio
Scope of delivery:
- RetroSound Motor-1DAB radio module
- RetroSound Europa display unit with warm white light color
- Control knobs and control rings
- Screw and fastening material
- ISO connection cable (power & speaker harness)
- Fastening material (Europa-Kit) - ISO installation kit for 1-DIN slot
- DAB+ antenna splitter
Condition: New
The RetroSound Motor-1DAB Europa Design Complete Set is supplied as a kit - no problem even for laypeople
