Retrosound One C Becker Optic complete set Oldtimer Retro Radio
The Production of the Retrosound model One was ended and is not longer available in the market. As successor model is the Retrosound Motor-1DAB-1 introduced. It has the following additional functions compared to the model Retrosound One: DAB+ Digital Radio, Bluetooth Hands-Free and A2DP Audio-Streaming, AUX, RDS and many other positive innovations!
In this offer, you will receive the successor model of the Retrosound One, the Retrosound Motor-1DAB-1. All descriptions below are based on the Retrosound of Motor-1DAB-1.
The RetroSound Motor-1DAB-1 retro radio is the basic model with DAB+ digital radio, FM/MW with RDS, Bluetooth hands-free system, A2DP audio streaming and an AUX-IN 3.5 jack MP3 connector (on the back of the device). With the Retrosound's patented "InfiniMount" mounting system and controls, you get the design of your classic and don't have to do without modern digital media. Optimal for your 70's 80's 90's oldtimer and youngtimer car interior to get the ideal vintage look. Bluetooth for Music streaming and Hands-free is compatible with all Smartphone Brands and operating system's.
With DAB+ antenna splitter:
If you would like to retrofit the Motor-1DAB-1 retro car radio with DAB+ in your car and still have a telescopic or rod antenna without an integrated amplifier, then use the enclosed DAB+ antenna splitter. You can use this antenna for VHF and DAB+ and avoid installing additional DAB+ antennas.
H-Mark:
Any concerns that your H license plate might be in danger by installing a RetroSound car radio are unfounded. After purchasing the RetroSound Motor-1DAB-1 radio, you will receive the download by email, where you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ). This states that the RetroSound car radio, including the vehicle-specific panel and control buttons, may be installed in classic cars with an H license plate and does not prevent the H license plate from being issued!
Features:
- Support automatic antenna (motor antenna)
- Supports amplifiers
- DAB+/FM/AM radio receiver with RDS and 30 preset stations
- Tuner with European odd and even radio frequencies
- Selectable USA/EUR/AUS/JAP/RUS tuner frequencies
- A2DP Bluetooth audio playback for wireless smartphone integration
- Bluetooth hands-free kit including a microphone
- Integrated 4-channel amplifier (4 x 18 watts RMS / 40 watts peak x 4 channels)
- 3 equalizer programs plus individual bass/treble/fader/balance adjustment
- XBAS loudness function
- Non-volatile memory
- Warm white LCD lighting
- AUX input (3.5mm) on the back of the device
- Dimensions radio base unit: 101mm x 51mm x 136mm
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00
Condition: New
The RetroSound Motor-1DAB-1 complete set is supplied as a kit - no problem even for laypeople.
Retrosound One C Becker Optic complete set Oldtimer Retro Radio
In this offer, you will receive the successor model of the Retrosound One, the Retrosound Motor-1DAB-1. All descriptions below are based on the Retrosound of Motor-1DAB-1.
Supports automatic antenna (motor antenna)
Supports amplifiers
Separate switch-on line for motor antenna and amplifier
RetroSound Motor-1DAB-1 Connections:
1 AUX input (stereo, rear of device)
AM/FM radio tuner:
UKW/FM European radio Frequency range with RDS 87.5 MHz to 107.9 MHz (in 0.05 MHz steps)
Tuner with European odd and even radio frequencies
AM/MW frequency range 530 kHz to 1710 kHz (in 9 kHz steps)
Antenna external connection
DAB+ reception via SMB antenna input for passive DAB+ antennas
Dimensions radio base unit: 101x51x136mm
Voltage supply: 10.5 volts to 14.4 volts
Maximum current consumption: 15 amps
Quiescent Current: 3.5mA
Output power: 12V, 4 ohms, <1% distortion: 4x18 watts (RMS)
Impedance speakers: 4-8 ohms
Input sensitivity: AUX1 >300 mV / 6 kOhm
E-approval:
e13 03 10006 e13*72/245*2006/96*10006*00
Successor model of Retrosound Radio:
RC-900C, RC-900B, Classic, Laguna, Motor-1A, Motor-1, Motor-L, Motor-1DAB, Motor-2DAB, Hermosa, Motor-2, Motor-H, Zuma, Santa Barbara, Motor-7
Retrosound One C Becker Optic complete set Oldtimer Retro Radio
In this offer, you will receive the successor model of the Retrosound One, the Retrosound Motor-1DAB-1. All descriptions below are based on the Retrosound of Motor-1DAB-1.
Delivery from vintage radio:
- RetroSound radio module Motor-1DAB-1
- RetroSound display unit Chrome
- Illumination Color (LCD): warm white
- Microphone for handsfree
- RetroSound front panel (chrome)
- RetroSound inserts (pinstripes)
- RetroSound front control button plastic (black/chrome)
- RetroSound rear control ring metal (chrome)
- Screw and fastening material
- ISO connection cable (power & speaker wiring harness)
- Fastening material - Universal 1-DIN installation kit
- H license plate confirmation from TÜV-Süd
- DAB+ antenna splitter
Condition: New
The RetroSound Motor-1DAB-1 Retro Radio complete set is supplied as a kit - no problem even for laypeople.
